Wood dust collector

Introduction
In the wood processing industry, such as furniture manufacturing, piano production, etc., there are inflammable dust with light density and high concentration in plate cutting, sawing, polishing, spraying and other links. Professional processing of wood dust equipment, beautiful appearance, anti-wear.
It is used in woodworking workshop, grinding workshop and paint workshop. It is composed of pipes, fans and filters to remove sawdust, paint dust and other particles produced during processing.
The air flow containing wood particles is transported by the fan to the deflector bin of the bag filter, the flow rate is reduced under the action of the deflector plate, the heavier wood particles fall into the ash bin under the action of gravity, and the other lighter and fine dust is adsorbed upward on the surface of the filter bag, after the filter of the bag, the clean gas enters the exhaust chamber and goes outside. With the continuous filtering I condition, the accumulation of dust on the outer surface of the filter bag will be more and more, which will increase the operating resistance of the system and reduce the dust removal efficiency of the system. The system is equipped with an automatic pulse ash cleaning device, which is composed of pulse controller, pulse valve, speed coupling, drum and jet pipe. According to the characteristics of wood pellets, the pulse amplitude and pulse frequency can be set on the pulse controller. After the pulse amplitude and frequency setting is completed, the system will automatically complete the cleaning of the filter bag during the working process, greatly increasing the filter efficiency and extending the service life of the filter bag.

Fireproof and explosion-proof woodworking dust removal
A woodworking dust collector with fire and explosion-proof function, which comprises a vacuum cleaner and a fire protection device, the fire protection device is composed of a humidifying nozzle, a solenoid valve,
The starting button, stop button, intermediate relay, intermittent relay and contactor are composed. The humidifying nozzle is fixed in the dust bin under the vacuum cleaner filter through a bracket, and is connected with the fire water source through a solenoid valve.

Woodworking dust removal - spark detection extinguishing system
The working principle of the spark detector is to install the spray device 7-10 meters away from the probe on the pipeline, and the fixed control box can be determined according to the site. The probe on the pipeline finds the spark, the control box and the alarm automatically alarm, the spray device automatically starts and extinguishes the spark, the whole process does not require manual participation, intelligent spark detection and extinguish system, accurate detection and sensitive response.